A novel miniaturized triband PIFA for MIMO applications

Abstract

AbstractMultiband antennas are vital in meeting the modern telecommunication demands of mobile terminals. Using the spatial properties of multipath channels, multiple‐input multiple‐output (MIMO) communication systems employ antenna arrays to increase their communication capacity. This article presents a novel printed inverted “F” antenna (PIFA), which has been used to design a miniaturized triband antenna. In turn, the triband antenna has been used as an element in various arrays of MIMO applications. Specifically, the antenna element has been constructed and applied, in arrays of two and four, in a laptop PCMCIA wireless LAN card. The size of the four element MIMO antenna array is 50 mm × 13 mm × 8 mm, which translates to 0.4λ × 0.1λ × 0.06λ at 2.45 GHz. The input impedance of the single element antenna has been measured at UCLA. The antenna has a return loss lower than −10 dB within the 2.4–2.5 GHz, 5.15–5.35 GHz, and 5.7–5.85 GHz bands. The measured scattering matrices of two and four element arrays have been used to calculate the total active reflection coefficient (TARC). TARC has been calculated for different combinations of excitation signals applied at each port. Each excitation signal has a unity magnitude and a random phase, thus leading to innumerable signal combinations. Our results reveal that “off” diagonal elements of the scattering matrix (couplings between elements) are as important as diagonal elements in calculating the TARC and the radiation efficiency of arrays. Furthermore, increasing the number of elements in a MIMO system with a limited volume will increase the channel capacity but lower the radiation efficiency. The experimental and simulation results have been in agreement. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 724–731, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22239