A novel L12-strengthened single crystal high entropy alloy with excellent high-temperature mechanical properties

Abstract

In this work, a novel and low-cost L12-strengthened single crystal high entropy alloy (HEA) was prepared through the seeding method of directional solidification. The microstructures, tensile properties and deformation mechanisms of the single crystal HEA were systematically investigated. The volume fraction of L12 precipitates after heat treatment was almost 80%, which was higher than that of conventional single crystal superalloys. The maximum yield strength, ultimate tensile strength and elongation, which were separately as 897 MPa, 1038 MPa and 37%, were obtained at the intermediate temperature of 800 °C. Moreover, at higher temperature (900 °C and 1000 °C), the HEA was able to maintain excellent performance, which was comparable to the commercial René N5 second-generation Ni-based single crystal superalloy. Finally, the high performance was examined by the model of strengthening contribution, which proved that the high-volume fraction of L12 precipitates in single crystal HEA was the primary reason for their significant precipitation and solid solution strengthening. Additionally, the formation of Lomer-Cottrell locks and stacking faults could enhance the high-temperature properties of the single crystal HEA.