Abstract

This study investigates the unprecedented impact of fast neutron irradiation on the structural, electrical, and morphological properties of solid polymer electrolytes (SPEs). The SPE, a poly (vinylalcohol) (PVA)-sodium bromide (NaBr) based matrix with the incorporation of silver nanoparticles (AgNPs), was prepared via a solution casting method and subjected to various time intervals of fast neutron irradiation. X-ray diffraction (XRD) analysis revealed a distinct trend in the polymer electrolyte sample's amorphous phase, with decreased levels at lower neutron fluence and augmented levels at higher fluences. Fourier transform infrared (FTIR) spectroscopy highlighted plausible interactions leading to chain scission and cross-linking. Optical investgations below 300 nm exhibited increased absorbance and a shifted position of the surface plasmon resonance peak correlated with AgNPs. Validation of structural changes in the Ag-incorporated PVA-NaBr system was supported by reduced bandgap and elevation in Urbach energy, corroborating FTIR findings. Enhanced thermal stability was confirmed using thermogravimetric (TGA) analysis. Morphological modification upon irradiation were evident via Field emission scanning electron microscope (FESEM). Transport properties evaluated by Nyquist plot fitting showcased escalating room temperature conductivity with neutron fluence, and the highest conductivity obtained was 4.38 × 10−3 S/cm, an order higher than the pristine sample. Transference number measurements (TNM) indicated that the primary charge carriers are ions rather than electrons. This novel approach confirms that neutron irradiation can be used as a potential way to obtain highly conductive polymer electrolyte films.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.