Abstract

AbstractGlucose biosensors play an important role in the diagnosis and continued monitoring of the disease, diabetes mellitus. This report proposes the development of a novel enzymatic electrochemical glucose biosensor based on TiO2 nanotubes modified by AgO and Prussian blue (PB) nanoparticles (NPs), which has an additional advantage of possessing antimicrobial properties for implantable biosensor applications. In this study, we developed two high‐performance glucose biosensors based on the immobilization of glucose oxidase (GOx) onto Prussian blue (PB)‐modified TiO2 nanotube arrays functionalized by Au and AgO NPs. AgO‐deposited TiO2 nanotubes were synthesized through an electrochemical anodization process followed by Ag electroplating process in the same electrolyte. Deposition of PB particles was performed from an acidic ferricyanide solution. The surface morphology and elemental composition of the two fabricated biosensors were investigated by scanning electron microscopy (SEM) and energy‐dispersive X‐ray spectroscopy (EDS) which indicate the successful deposition of Au and AgO nanoparticles as well as PB nanocrystals. Cyclic voltammetry and chronoamperometry were used to investigate the performance of the modified electrochemical biosensors. The results show that the developed electrochemical biosensors display excellent properties in terms of electron transmission, low detection limit and high stability for the determination of glucose. Under the optimized conditions, the amperometric response shows a linear dependence on the glucose concentration to a detection limit down to 4.91 µM with sensitivity of 185.1 mA M−1 cm−2 in Au‐modified biosensor and detection limit of 58.7 µM with 29.1 mA M−1 cm−2 sensitivity in AgO‐modified biosensor.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call