Abstract
Aiming at the research on the stopping sight distance of the highway, on the basis of calculating the stopping sight distance in the current specification, the actual braking process of the car is divided into three stages: the driver’s reaction stage, the braking force rising stage and the continuous braking stage. The calculation model of the complete braking stage is analyzed by MATLAB, and then the calculation model of the stopping sight distance of the ESC system is proposed. Considering the ambiguity of the operating speed, the fuzzy reliability theory is introduced to establish the function of the fuzzy reliability of the stopping sight distance. Using the Gaussian fuzzy number and the center point method, the reliability index and failure probability of the stopping sight distance are obtained, and the safety of the stopping sight distance is evaluated. According to the "Uniform Standard for Reliability Design of Highway Engineering Structures", the traditional reliability calculation method and the fuzzy reliability calculation method are used to calculate the stopping sight distance value that meets the corresponding reliability index of the highway safety level. The calculated value of the system stopping sight distance model is used as a reference, and the reliability index and failure probability of the two reliability calculation methods are calculated. The calculation results show that: compared with the traditional reliability calculation method, the fuzzy reliability calculation method calculates the stopping sight distance value with higher reliability index, lower failure probability and higher calculation accuracy. Implementing the road design based on the stopping sight distance value calculated by the fuzzy reliability theory can improve the road safety.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have