Abstract
A new single degree-of-freedom (1 DOF) resonance device was developed. It mainly comprises a linear motor, a vibrating screen, a supporting spring set, a supporting frame and a damper set. Forces acting on the vibrating screen were found. A differential equation for describing the forces was set up. Equations that were used to evaluate the exciting force and exciting frequency in resonance were derived from the solution to the differential equation. In addition, an equation for evaluating the deformed magnitude of the damping springs in the damper set was presented so that the suitable damping may be obtained. Finally, a Matlab/Simulink model of the new 1 DOF resonance device was also built. Displacement-time curves of the vibrating screen under four conditions were obtained in the use of the Matlab/Simulink simulation. The curves indicate that it can shorten the time for the vibrating screen to be into the stable resonance with increasing the damping, and it can lengthen the time with increasing the vibrated mass or amplitude, but every given angular frequency cannot acquire the desired amplitude value of resonance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.