A new perspective on Lüders band formation in medium-Mn steels based on Lüders-strain-rate and dislocation evolution

Abstract

Propagating Lüders bands with pronounced strain localization are often observed in medium-Mn transformation-induced plasticity (TRIP) steels, which adversely limits the application of such alloys in engineering structures. The present work aims to understand this phenomenon from a dislocation-based perspective, with a focus on the specific role of dislocation multiplication. The material studied is a typical dual-phase medium-Mn steel with a ferrite matrix and a second phase of retained austenite. A warm-rolling process was used as a pre-straining approach to adjust the microstructure of the material, such that materials with two different microstructural states can be obtained: as-received material and pre-strained material. They show distinct differences in initial dislocation density. Stress-controlled rather than conventional strain-controlled tensile testing was adopted, which allowed the Lüders band to develop in an unconstrained manner. In this way, the intrinsic Lüders-strain-rate can be obtained. The results show that the Lüders band-related mechanical parameters, including Lüders strain, Lüders-strain-rate and yield stress drop, all depend on the initial microstructure state and the dislocation evolution process during Lüders band formation. In particular, Lüders-strain-rate is a critical microstructure-sensitive factor. It is closely related to the dislocation multiplication in the formation of Lüders band, which can be characterized and quantified using scanning transmission electron microscope and synchrotron X-ray diffraction. Finally, a quantitative relationship between Lüders-strain-rate and dislocation multiplication rate is established, which allows providing a better understanding of the exceptional Lüders band phenomenon in medium-Mn steels.