Abstract
Current high power laser transmission technology faces two major limitations to improve the efficiency of the photovoltaic receivers: the intrinsic entropic losses associated to low bandgap materials (such as GaAs) and the series resistance losses that degrade the device performance at high power densities. The use of high bandgap materials and new architectures for laser power converters (LPC) have been pointed out as alternatives to overcome these limitations. In this work, three silicon carbide polytypes (3C, 4H and 6H) are proposed as base materials for the standard horizontal laser power converter (hLPC) architecture and the Vertical Epitaxial Hetero-Structure Architecture (VEHSA). 3C SiC based hLPCs outperform the power converters based on the other two polytypes, achieving a maximum efficiency of 84.6% at ▪, but suffer from series resistance losses, that deteriorate their efficiency, at higher laser power densities. This issue is solved with 3C SiC 4 cells VEHSAs that demonstrated increasing efficiency with the input power, reaching a maximum of 87.4% at ▪. The VEHSA reduced number of cells minimize the risks of efficiency losses due to current mismatch between cells. These results support the feasibility of a new generation of LPCs capable of efficiently convert ultra-high laser power densities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.