A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces

Abstract

ABSTRACTIn today’s industries, the internal surface finishing of cylindrical objects is highly demanded to improve their functional performance in various engineering applications. During the traditional honing operation, the finishing forces produced by abrasives on the workpiece surface are not easily controllable and also produce various surface defects. Therefore, to further improve the surface integrity of the traditionally cylindrical honed surface made of ferromagnetic or non-ferromagnetic materials, a new magnetorheological (MR) finishing process has been used with a controlled magnetic field. The experimentation is performed on the honed surface made of gray cast iron, which is generally used as a cylinder liner. The percentage change in surface roughness values, i.e., Ra, Rq and Rz, reduced by 77.44%, 70.16% and 72.16%, respectively, with better improvement in surface after 90 minutes of finishing. The experimental results demonstrated the effectiveness of present process for improving the functional applications of ferromagnetic cylindrical honed surface after removing the various surface defects such as deeper grooves, honing grooves with shaper edges, torn and folded metals, and cavities or holes. The applications of new MR finishing process can also be useful in the internal finishing of injection barrel of a molding machine, cylindrical molds and dies, hydraulic cylinder, etc.