Abstract
Operating characteristics of small and medium tonnage lattice boom crane which withstand fatigue loads was analyzed in this paper. It showed that the lattice boom crane utilization level is in the overlap zone of low cycle fatigue and high cycle fatigue. There may be some plastic deformation in the structure. So the total damage calculated by the Palmgren-Miner rule had a large scatter. Typical operating conditions was analyzed that K-type welded joints of the boom is under axial load and in-plane bending loads. Several critical areas of K-type welded joints were determined by ANSYS finite element calculation software where the stress amplitude was larger on the single side of the lattice boom. A new stress spectrum acquisition method based on the “measured+statistics+compare+simulation” integrated strategy of crane K-type welded joints was proposed. Based on a simplified Huffman non-linear cumulative damage theory, fatigue life of crane K-type welded Joints were calculated based on the strain parameters. They were compared with Palmgren-Miner rule and together with fracture mechanics method. Results showed that although they were all conservative compared with test results, the new method can be applied easily in for engineering applications because it only need amplitude constant amplitude fatigue strain-life data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.