A new digital single-axis fluxgate magnetometer according to the cobalt-based amorphous effects.

Abstract

Fluxgate sensors are currently widely used for weak magnetic field measurement because of their relatively great performance, such as resolution, power consumption, and measurement of vector magnetic fields directly. Since the analog fluxgate sensor has some drawbacks, e.g., it would be influenced by the noise of the analog circuit. Hence, in recent years, the analog circuit is gradually inclined to be realized by digital processing in which the software parameter adjustment is employed to replace the analog components, which can greatly improve the flexibility of the design. This paper proposes a digital single-axis fluxgate sensor according to the cobalt-based amorphous effect. To be specific, the analog signal output by the fluxgate is sampled directly by an analog-to-digital converter to obtain the signal waveform in digital form after amplification. The demodulation, filtering, and integration of the signal are all solved by mathematical algorithms. Based on the working principle of the fluxgate sensor, the selection of the magnetic core material and coil winding method of the fluxgate sensor probe is introduced in detail. The design and function of the excitation circuit and preamplifier circuit, as well as the specific realization of digital signal processing, are described. Finally, the performance test of the digital fluxgate sensor was performed under laboratory conditions, and the magnetic anomaly detection comparison experiment was performed outdoors with commercial fluxgate sensors. To sum up, the linearity of the digital single-axis fluxgate sensor is better than 1 × 10-5, and the root mean square noise value is below 0.1 nT. At the same time, it has good magnetic field tracking performance and is extremely sensitive to the magnetic field of the measurement area.