A new chemical method of reducing the reflectance of glass : F.H. Nicoll ( R. C. A. Review, Vol. VI, No. 3.)

Abstract

Current measurement techniques do not allow the visualization of the return air flow of open volumetric receivers in solar tower power plants. The reason is that the region of interest is irradiated by concentrated solar radiation and is located on top of a tower. Therefore, a novel method of measurement, the Induced Infrared Thermography (IIT) is introduced within this paper. With this method the return air can easily be observed with an infrared camera. As air has a very low emissivity in the infrared region the activity has to be induced by the addition of an infrared-active component, here carbon dioxide. The temperature of the infrared-active component has the greatest influence on the signal strength but the mole fraction of the component and the distance to the infrared camera are also important. Due to temperature restrictions, the measured signal to noise ratio is low and therefore several post-processing steps have to be conducted to visualize the return air. The most important step for the visualization is subtracting a background image. Furthermore, a video filter is employed in order to remove noise. A time series of ITT images can be used to obtain information on the velocity fields of the flow. The process, called Infrared Image Velocimetry (IRIV) here, is similar to Particle Image Velocimetry (PIV) and is applied in this paper to external fluid flows of the open volumetric receiver. As IRIV is in an early stage of development the depicted results are treated as qualitative vector fields.