A new approach for synthesis of bismuth oxide derived photocatalyst for degradation of para nitrophenol

Abstract

More focus has recently been placed on achieving the sustainable development objectives by 2030. As water is important and ha many purposes, it is important to have clean water. The inefficiency of different water treatment techniques restricts their widespread implementation. Furthermore, some of the procedures readily create secondary pollutants. As a result, it is critical to develop an effective and ecologically beneficial method of converting organic contaminants into non-toxic and harmless chemicals. A modified hydrothermal synthesis method was utilised for successfully producing Bi2O3 nanoparticles in this research. Fourier Transform Infrared (FT-IR) spectroscopy, X-Ray Diffraction (XRD), Scanning Electron Microscopy, and Energy Dispersive X-Ray were used to characterise and to find the structural, optical, morphological, and compositional aspects of the formed nanoparticles. Moreover, the formed particles were used to degrade the noxious Para-nitrophenol (PNP). PNP deterioration was performed under 3 different conditions: under halogen light, under sunlight and in the dark. The experiment showed that halogen irradiation showed better result. Due to PNP adsorption on Bi2O3, even without irradiation, a small degradation was detected but in just over an hour, under halogen light the catalyst destroyed 99.23 % of 4-nitrophenol. We also used natural lighting in our degradation studies. Natural daylight deterioration efficiency was 63.26 %. The nanoparticles that were formed turned out to be an excellent photocatalyst for the degradation of PNP in wastewater.