A multi-physics CFD study to investigate the impact of laser beam shaping on metal mixing and molten pool dynamics during laser welding of copper to steel for battery terminal-to-casing connections

Abstract

This study aims to investigate the impact of laser beam shaping on metal mixing and molten pool dynamics during laser beam welding of Cu-to-steel for battery terminal-to-casing connections. Four beam shapes were tested during LBW of 300 µm Cu to 300 µm nickel-plated steel. Both experiments and simulations were used to study the underlying physics. A CFD model was firstly calibrated against experiments and then deployed to explore the effect of the increasing ring-to-core diameter, as well as a tandem laser spot configuration. The study showed that metal mixing is influenced by the keyhole dynamics and collapse events, but also there is an intricate interplay between keyhole geometry, fluid dynamics via Marangoni forces and buoyancy forces. Notably, the buoyance forces due to the different densities of steel and Cu, along with the recoil pressure contribute to the upward flow of steel towards Cu, and hence impact meaningfully the material mixing. The study pointed-out that the selection of a custom ring-to-core diameter and ring-to-core power is a decision with a trade-off between the need of stabilising the keyhole dynamics and the need to reduce the mixing. Findings indicated that 350 µm ring and 90 µm core with 30% of ring power (weld configuration C3) resulted in more stable dynamics of the keyhole, with significant reduction of collapse events, and ultimately controlled migration of steel towards Cu. Additionally, the pre-heating approach with the tandem beam only led to local fusion of Cu and no significant improvement in keyhole stability was observed.