A More Controllable Laser Reduction of Graphene Oxide Membrane for Electrode Applications

Abstract

Reduced graphene oxide (rGO) has attracted significant attention as an active electrode material for sensors and flexible energy devices due to its high electric conductivity and large surface area. rGO is usually obtained from graphene oxide(GO) through a thermal, chemical, photochemical, and electrochemical reduction process. Compared to the other reduction strategy, laser reduction is a single-step, precise, low cost, and chemical-free processing that can be directly applied on the GO membrane at room temperature in an ambient condition.The laser irradiation parameter, such as laser source, power, speed, and frequency, plays an important role in reduction optimization. In general, the quality of the rGO is not as high as that of pristine graphene because of incomplete reduction, and oxygenated defects involved in the reduction process.The not fully removed oxygenated function group not only influence the sensitivity and selectivity of the electrode, but also influences response time and recovery time during sensing and the electrochemical window of the supercapacitor made with those rGO electrode.This study aims to develop reduced graphene oxide (rGO) through laser irradiation for application in supercapacitors and electrochemical sensors as electrodes. GO membranes were fabricated with a layer-by-layer assembly process first then further reduced through conventional CO2 laser reduction. The laser irradiation parameters including intensity, frequency, and scan speed will be optimized to achieve the reduction up to maximi, C/O ratio. The effects of the reduction will be characterized and evaluated using scanning electron microscope (SEM), Fourier Transform Infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD)spectroscopy, and four-point probe station. The influence of the humidity on the impedance of the rGO electrode and the capacitance of the planar supercapacitor made with rGO electrode will also be analyzed for potential application of as-prepared rGO electrodes in supercapacitors and humidity sensors.