A modified release analysis procedure using advanced froth flotation mechanisms: Technical report, March 1, 1996-May 31, 1996

Abstract

Recent studies indicate that the optimum separation performances achieved by multiple stage cleaning using various column flotation technologies and single stage cleaning using a Packed-Flotation Column are superior to the performance achieved by the traditional release procedure, especially in terms of pyritic sulfur rejection. This superior performance is believed to be the result of the advanced flotation mechanisms provided by column flotation technologies. Thus, the objective of this study is to develop a suitable process utilizing the advanced froth flotation mechanisms to characterize the true flotation response of a coal sample. Work in this reporting period concentrated on developing a modified coal flotation characterization procedure, termed as Advanced Flotation Washability (AFW) technique. The new apparatus used for this procedure is essentially a batch operated packed-column device equipped with a controlled wash water system. Several experiments were conducted using the AFW technique on a relatively high sulfur, -100 mesh Illinois No. 5 run-of-mine coal sample collected from a local coal preparation plant. Similar coal characterization experiments were also conducted using the traditional release and tree analysis procedures. The best performance curve generated using the AFW technique was found to be superior to the optimum curve produced by the traditional procedures. For example, at a combustible recovery of 80%, a 19% improvement in the reduction of the pyritic sulfur content was achieved by the AFW method while the ash reduction was also enhanced by 4%. Several tests are on-going to solidify the AFW procedure and verify the above finding by conducting Anova analyses to evaluate the repeatability of the AFW method and the statistical significance of the difference in the performance achieved from the traditional and modified coal characterization procedures.