A modification of DMVs based state space model of variation propagation for multistage machining processes

Abstract

PurposeComplicated workpiece, such as an engine block, has special rough locating datum features (i.e. six independent datum features) due to its complex structure. This locating datum error cannot be handled by current variation propagation model based on differential motion vectors. To extend variation prediction fields, this paper aims to solve the unaddressed variation sources to modify current model for multistage machining processes.Design/methodology/approachTo overcome the limitation of current variation propagation model based on differential motion vectors caused by the unaddressed variation sources, this paper will extend the current model by handling the unaddressed datum-induced variation and its corresponding fixture variation.FindingsThe measurement results of the rear face with respect to the rough datum W and the pan face with respect to the hole Q by coordinate measuring machine (CMM) are −0.006 mm and 0.031 mm. The variation results for rear face and pan face predicted by the modified model are −0.009 mm and 0.025 mm, respectively. The discrepancy of model prediction and measurement is very small.Originality/valueThis paper modifies the variation propagation model based on differential motion vectors by solving the unaddressed variation sources, which can extend the variation prediction fields for some complicated workpiece and is useful in the future work for many fields, such as process monitoring, fault diagnosis, quality-assured setup planning and process-oriented tolerancing.