Abstract
Abstract—A model based on micro‐mechanical concepts has been developed for predicting fatigue crack growth in titanium alloy matrix composites. In terms of the model, the crack system is composed of three zones: the crack, the plastic zone and the fibre. Crack tip plasticity is constrained by the fibres and remains so until certain conditions are met. The condition for crack propagation is that fibre constraint is overcome when the stress at the location of the fibre ahead of the crack tip attains a critical level required for debonding. Crack tip plasticity then increases and the crack is able to propagate round the fibre. The debonding stress is calculated using the shear lag model from values of interfacial shear strength and embedded fibre length published in the literature.If the fibres in the crack wake remain unbroken, friction stresses on the crack flanks are generated, as a result of the matrix sliding along the fibres. The friction stresses (known as the bridging effect) shield the crack tip from the remote stress, reducing the crack growth relative to that of the matrix alone. The bridging stress is calculated by adding together the friction stresses, at each fibre row bridging the crack, which are assumed to be a function of crack opening displacement and sliding distance at each row. The friction stresses at each fibre row will increase as the crack propagates further until a critical level for fibre failure is reached. Fibre failure is modelled through Weibull statistics and published experimental results. Fibre failure will reduce the bridging effect and increase the crack propagation rate.Calculated fatigue lives and crack propagation rates are compared with experimental results for three different materials (32% SCS6/Ti‐15‐3, 32% and 38% SCS6/Ti‐6‐4) subjected to mode I fatigue loading. The good agreement shown by these comparisons demonstrates the applicability of the model to predict the fatigue damage in Ti‐based MMCs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
