Abstract
We developed a model that predicts the hemodynamics of the volumetrically-controlled circuit used to administer high flux hemodialysis. The equations simulate the entire blood side of the circuit so that blood and dialysate pressures can be predicted from a knowledge of circuit component and patient characteristics. An alternative method of computation has also been devised which permits measured circuit pressures to be used to predict patient blood access pressure, dialyzer resistance to flow and membrane hydraulic conductivity. Success of the model was evaluated by measuring both circuit pressure and component characteristics. The model successfully predicted circuit pressures when measured component characteristics were employed as model inputs. Conversely, the model accurately predicted circuit component characteristics when measured pressures were employed as inputs (8 patients, 30 dialyses). Specific predictions of the model include the following. Elevations of patient blood access pressure will cause blood and dialysate pressures to rise equivalently without affecting the rate of back-filtration or location of pressure equilibrium along the dialyzer axis. Elevated hematocrit is predicted to increase circuit pressures to a degree that is similar to a poorly functioning blood access, however, high hematocrit markedly augments back-filtration and moves the point of pressure equilibrium toward the dialyzer entrance. We conclude that the model provides a predictive tool that can be used to optimize circuit design. Alternatively, the model can be used to separate the influence of a poorly functioning patient access from other factors which can elevate circuit pressures.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call