Abstract
This paper presents a miniaturized 28-GHz FEM implemented in 0.15-µm InGaAs/GaAs E-mode pHEMT process. It is designed for use with 28-GHz switching beamforming systems. In order to miniaturize the system, the RF FEM is mounted on the printed circuit board in the form of individual PA, switch, and LNA chips, and development has been made to facilitate the mounting of mobile terminals. The results of the FEM transmitter verification including the implemented filter on the PCB have a gain of 17.9 dB, an output P1 dB of 24.2 dBm and an EVM of -30 dB at 20 dBm output. As a result of the receiver verification, the gain is around 20 dB, the input P1 dB is -30 dBm, and the EVM performance of -30 dB is tested at -10 dBm output.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
