A method of quantitative characterization for the component of C/C composites based on the PLM video

Abstract

PLM video is used for studying the microstructure of C/C composites, because it contains the structure and motion information at the same time. It means that PLM video could provide more comprehensive microstructure features of C/C composites, and then the microstructure could be quantitatively characterized by image processing. However, several unavoidable displacements still exist in the PLM video, which could occur during the process of image acquisition. Therefore, an image registration method was put forward to correct the displacements by the phase correlation, and further to achieve the quantitative characterization of component combined with image fusion and threshold segmentation based on the PLM video of C/C composites. Specifically, PLM video was decomposed to a frame sequence firstly. Then a series of processes was carried out on this basis, including selecting the frame as equal interval, segmenting the static and dynamic regions and correcting the relative displacements between the adjacent frames. Meanwhile, the result of image registration was verified through image fusion, and it indicates that the proposed method could eliminate the displacements effectively. Finally, some operations of image processing were used to segment the components and calculate their fractions, thus the quantitative calculation was achieved successfully.