A membrane fouling control strategy based on a combination of pre-treatment mitigation and in-situ membrane surface regulation using a composite coagulant

Abstract

Ultrafiltration technology (UF) is efficient in surface water treatment, but its development and widespread application are limited by membrane fouling. Herein, an efficient and stable polymerized ferric titanium coagulant (PFTC) was synthesized and used as a UF pretreatment agent in actual lake water treatment. The control mechanism of PFTC on membrane fouling was investigated from the perspective of organic removal efficiency and in-situ membrane surface regulation. PFTC demonstrated a remarkable affinity for soluble metabolic intermediates and hydrophilic proteins through complexation and hydrogen bonding force, achieving removal efficiencies of 66.4 % for UV254 and 81.3 % for DOC, respectively. The hydrophilic pollutants with high molecular weight and non-saturated structure could be preferentially removed by PFTC due to its diverse hydrolysates including positively charged Fe-based hydrolysates, amorphous Ti-based hydrolysates, and highly polymerized Fe-Ti copolymers. The flocs generated by PFTC exhibited strong hydrophilicity, allowing for the formation of a loose porous cake layer on the ultrafiltration membrane, which acted as a hydrophilic layer to enhance the anti-fouling performance of ultrafiltration membrane. With its dual function of contaminant removal and in-situ membrane surface regulation, PFTC alleviated 98.9 % of membrane fouling. This study provides new insights into membrane fouling control by coagulation pretreatment and efficient treatment of surface water.