Dynamic evolution of ultrafiltration membrane fouling affected by S(IV)–Fe(II)-activated permanganate pretreatment during a long-term operation

Abstract

ABSTRACT The S(IV)–Fe(II)/PM pretreatment has demonstrated preliminary potential as an effective ultrafiltration (UF) pretreatment technology. However, a comprehensive understanding of its impact on UF membrane fouling control and the dynamic evolution of membrane fouling during prolonged operation is still lacking. In this study, a relatively prolonged fouling experiment was conducted. Results revealed that the S(IV)–Fe(II)/PM pretreatment exhibited superior performance over Al(III) coagulation pretreatment in mitigating the transmembrane pressure difference and addressing both reversible and irreversible membrane fouling. The application of a cluster analysis method to classify membrane fouling evolution stages further confirmed that S(IV)–Fe(II)/PM pretreatment effectively decelerated the rate of membrane fouling evolution. The surface cake layer of UF membranes pretreated with S(IV)–Fe(II)/PM exhibited greater looseness and smoothness. It also showed better results than Al(III) coagulation pretreatment in reducing the accumulation of organic foulants, controlling the Si content and reducing the total microorganisms and live microorganisms in the UF feed water. Variance Partitioning Analysis indicated that the combined contribution of organic, inorganic, and biological foulants was the most significant for UF membranes after S(IV)–Fe(II)/PM pretreatment (50.4%) and UF membranes after Al(III) coagulation pretreatment (70.2%). These findings underscore the efficacy of S(IV)–Fe(II)/PM pretreatment in controlling UF membrane fouling under prolonged operation.