Abstract
We report on the imaging detector array test and evaluation program for the Spectral and Photometric Imaging REceiver (SPIRE) instrument for the Far InfraRed and Submillimetre Telescope (FIRST) satellite. Three candidate detector array technologies are under evaluation: (i) hexagonally close-packed arrays of 2 Fλ feedhorns with NTD germanium sensors; (ii) filled absorber arrays with 0.5 Fλ square pixels with ion-implanted silicon sensors; and (iii) 0.5 Fλ filled arrays with transition-edge superconducting (TES) sensors. Detector arrays are required for SPIRE bands covering the 200–700 μm range. To meet the SPIRE performance requirements, the detectors must be background limited by the thermal emission from the 80 K low-emissivity FIRST telescope, achieve a speed of response of 20 Hz, and be fabricated in sizes up to 32×32. A novel cryogenic array test facility has been built to enable a range of experiments to be carried out under low background to enable a comprehensive evaluation and calibration programme on prototype detector arrays with a minimum of disruptive warm-up/cool-down cycles. The facility will be used to compare the performance of the different array types prior to array technology selection for SPIRE.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
