A low power non-volatile LR-WPAN baseband processor with wake-up identification receiver

Abstract

The paper proposes a low power non-volatile baseband processor with wake-up identification (WUI) receiver for LR-WPAN transceiver. It consists of WUI receiver, main receiver, transmitter, non-volatile memory (NVM) and power management module. The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique, which increases the robustness and energy efficiency of receiver. The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver. The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode. The baseband processor is designed and verified on a FPGA board. The simulated power consumption of processor is 5.1μW for transmitting and 28.2μW for receiving. The WUI receiver technique reduces the average power consumption of transceiver remarkably. If the transceiver operates 30 seconds in every 15 minutes, the average power consumption of the transceiver can be reduced by two orders of magnitude. The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.