Abstract
We propose a transfer gate phase coupler for a low-power multi-phase oscillator (MPOSC). The phase coupler is an nMOS transfer gate, which does not waste charge to the ground and thus achieves low power. The proposed MPOSC can set the number of outputs to an arbitrary number. The test circuit in a 180-nm process and a 65-nm process exhibits 20 phases, including 90° different angles. The designs in a 180-nm CMOS process and a 65-nm CMOS process were fabricated to confirm its process scalability; in the respective designs, we observed 36.6% and 38.3% improvements in a power-delay products, compared with the conventional MPOSCs using inverters and nMOS latches. In a 65-nm process, the measured DNL and 3σ period jitter are, respectively, less than ±1.22° and 5.82ps. The power is 284µW at 1.85GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.