Abstract

This study presents a low-power multi-lead wearable electrocardiogram (ECG) signal sensor system design that can simultaneously acquire the electrocardiograms from three leads, I, II, and V1. The sensor system includes two parts, an ECG test clothing with five electrode patches and an acquisition device. Compared with the traditional 12-lead wired ECG detection instrument, which limits patient mobility and needs medical staff assistance to acquire the ECG signal, the proposed vest-type ECG acquisition system is very comfortable and easy to use by patients themselves anytime and anywhere, especially for the elderly. The proposed study incorporates three methods to reduce the power consumption of the system by optimizing the micro control unit (MCU) working mode, adjusting the radio frequency (RF) parameters, and compressing the transmitted data. In addition, Huffman lossless coding is used to compress the transmitted data in order to increase the sampling rate of the acquisition system. It makes the whole system operate continuously for a long period of time and acquire abundant ECG information, which is helpful for clinical diagnosis. Finally, a series of tests were performed on the designed wearable ECG device. The results have demonstrated that the multi-lead wearable ECG device can collect, process, and transmit ECG data through Bluetooth technology. The ECG waveforms collected by the device are clear, complete, and can be displayed in real-time on a mobile phone. The sampling rate of the proposed wearable sensor system is 250 Hz per lead, which is dependent on the lossless compression scheme. The device achieves a compression ratio of 2.31. By implementing a low power design on the device, the resulting overall operational current of the device is reduced by 37.6% to 9.87 mA under a supply voltage of 2.1 V. The proposed vest-type multi-lead ECG acquisition device can be easily employed by medical staff for clinical diagnosis and is a suitable wearable device in monitoring and nursing the off-ward patients.

Highlights

  • With urbanization and an accelerating population of the aging society, combined with a human unhealthy diet, lack of exercise, stress, and other factors, the number of people suffering fromSensors 2019, 19, 4996; doi:10.3390/s19224996 www.mdpi.com/journal/sensorsSensors 2019, 19, 4996 cardiovascular diseases continues to increase [1]

  • The working mode of a micro control unit (MCU) was optimized to reduce the power consumption; a Bluetooth 4.0 low energy (BLE) protocol stack was modified to improve the parameters in the Bluetooth digital communication process; ECG data was compressed by Huffman

  • A multi-lead wearable ECG signal sensor system is designed for patients with cardiac diseases and users who need ECG monitoring

Read more

Summary

A Low-Power High-Data-Transmission Multi-Lead

Liang-Hung Wang 1, * , Wei Zhang 1 , Ming-Hui Guan 1 , Su-Ya Jiang 1 , Ming-Hui Fan 1, *, Patricia Angela R. Abu 2 , Chiung-An Chen 3 and Shih-Lun Chen 4, *. Received: 4 October 2019; Accepted: 13 November 2019; Published: 16 November 2019

Introduction
Section
Hardware architecture implemented implemented in in the the ECG
Low-Power Design for the Core Devices
Experimental Results and Performance Analysis
Results
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call