Abstract
A variety of treatment processes have been used for arsenic removal from water. In a laboratory study using natural (tubewell) water, ferric chloride salt and alum were used, which are the most studied and widely used flocculents in water treatment due to their low price, comfortable availability and low risk usability. The solubility of arsenate(III) is much more than arsenite(V). Arsenate(III) was converted into arsenite(V) by proper oxidation using bleaching powder as an oxidizing agent before coagulation. The concentrations of ferric chloride salt and alum dose were varied from 10 mg/l to 200 mg/l, and pH was varied from 4 to 9. After intensive investigation, it was found that at pH 7 and for 100 mg/l to 125 mg/l dose of alum, the removal efficiency of arsenic and iron were around 82 to 86% and 92 to 95% respectively. Again, the optimum removal of arsenic and iron were around 90 to 93% and 97 to 100% respectively at pH 7 for 200 mg/l of ferric chloride salt. This research was carried out not only to observe the removal efficiency of arsenic, but also iron. Because most of the tubewells in Bangladesh, sometimes, contain higher amount of iron.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
