Abstract
Measurement capability for the detection of atmospheric OH and HO2 has been developed at the Pennsylvania State Universityover the last decade. The instrument is used in two forms: an aircraft configuration, Airborne Tropospheric Hydrogen Oxides Sensor (ATHOS), and the configuration used on towers, Ground-based Tropospheric Hydrogen Oxides Sensor (GTHOS). The instrument uses ultraviolet laser induced fluorescence (LIF) to detect OH in air that is pulled by a vacuum pump through a small inlet into a low-pressure detection chamber; HO2 is detected by reacting it with NO to form OH, which is detected by LIF in a second detection chamber. In the calibration, equal amounts of OH and HO2 ranging from 0.15 pptv to 100 pptv are produced via photolysis of water vapor by the 185 nm emission from a low-pressure Hg lamp. Estimated absolute uncertainty at the 2σ confidence level is ± 32% for bothOH and HO2. The dependence of the instrument detection sensitivity hasbeen quantified for changes in ambient water vapor, pressure, laser power, and the flow velocity of ambient air past the inlet. During the last 7 years, the instrument has been deployed in multi-investigator intensive field studies 5 times on the NASA DC-8 aircraft and 8 times on ground-based towers. The descriptions in this manuscript detail our cumulative wisdom of the instrumental response and calibration techniques developed over this time.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
