Abstract
Direct measurement of the wall pressure loading subjected to the near‐field underwater explosion is of great difficulty. In this article, an improved methodology and a lab‐scale experimental system are proposed and manufactured to assess the wall pressure loading. In the methodology, a Hopkinson bar (HPB), used as the sensing element, is inserted through the hole drilled on the target plate and the bar’s end face lies flush with the loaded face of the target plate to detect and record the pressure loading. Furthermore, two improvements have been made on this methodology to measure the wall pressure loading from a near‐field underwater explosion. The first one is some waterproof units added to make it suitable for the underwater environment. The second one is a hard rubber cylinder placed at the distal end, and a pair of ropes taped on the HPB is used to pull the HPB against the cylinder hard to ensure the HPB’s end face flushes with loaded face of the target plate during the bubble collapse. To validate the pressure measurement technique based on the HPB, an underwater explosion between two parallelly mounted circular target plates is used as the validating system. Based on the assumption that the shock wave pressure profiles at the two points on the two plates which are symmetrical to each other about the middle plane of symmetry are the same, it was found that the pressure obtained by the HPB was in excellent agreement with pressure transducer measurements, thus validating the proposed technique. To verify the capability of this improved methodology and experimental system, a series of minicharge underwater explosion experiments are conducted. From the recorded pressure‐time profiles coupled with the underwater explosion evolution images captured by the HSV camera, the shock wave pressure loading and bubble‐jet pressure loadings are captured in detail at 5 mm, 10 mm, …, 30 mm stand‐off distances. Part of the pressure loading of the experiment at 35 mm stand‐off distance is recorded, which is still of great help and significance for engineers. Especially, the peak pressure of the shock wave is captured.
Highlights
With the development and improvement of the underwater guidance technology, the probability of ships subjected to the near-field underwater explosion rises rapidly, which contributes to much more attention received in the quantification of the wall pressure loading and structure protection subjected to the near-field underwater explosion. e loading generated by the near-field underwater explosion acting on the hull is extremely high and can cause serious damage to the structure of the ship and great casualties [1, 2]. e accurate assessment of the wall pressure loading generated by the nearfield underwater explosion is an extremely important basis to design ship structures of high quality and save lives in conflicts or sea wars
Violent underwater explosions cannot be conducted in the lab, which means the wall pressure loading acting on the loaded face of the Hopkinson bar (HPB) is very small
Before the measure technique based on Hopkinson bar to assess the wall pressure loading, the question that whether the pressure loading obtained based on the shock stress wave is equal to the real wall pressure loading due to the near-field underwater explosion must be answered
Summary
With the development and improvement of the underwater guidance technology, the probability of ships subjected to the near-field underwater explosion rises rapidly, which contributes to much more attention received in the quantification of the wall pressure loading and structure protection subjected to the near-field underwater explosion. e loading generated by the near-field underwater explosion acting on the hull is extremely high and can cause serious damage to the structure of the ship and great casualties [1, 2]. e accurate assessment of the wall pressure loading generated by the nearfield underwater explosion is an extremely important basis to design ship structures of high quality and save lives in conflicts or sea wars. Cui et al [12] conducted a series of small-charge underwater experiments to study the bubble dynamics near various boundary conditions In their experiments, pressure transducers were placed in the water and on the target plate to record both free-field and wall pressure loading. A new lab-scale experimental system is developed and manufactured to assess the wall pressure loading, generated by a near-field underwater explosion, on the surface consisting of a shock wave loading and a series of continuous bubble-jet loadings In this system, a Hopkinson [25] or Kolsky [26] pressure bar (HPB), which is inserted through the hole is drilled through the center of the circular target plate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.