Abstract
A La0.8Sr0.2MnO3 (LSM)/La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) core–shell structured composite cathode of solid oxide fuel cells (SOFCs) has been fabricated by wet infiltration followed by a rapid sintering (RS) process. The RS is carried out by placing LSCF infiltrated LSM electrodes directly into a preheated furnace at 800 °C for 10 min and cooling down very quickly. The heating and cooling step takes about 20 s, substantially shorter than 10 h in the case of conventional sintering (CS) process. The results indicate the formation of a continuous and almost non-porous LSCF thin film on the LSM scaffold, forming a LSCF/LSM core–shell structure. Such RS-formed infiltrated LSCF–LSM cathodes show an electrode polarization resistance of 2.1 Ω cm2 at 700 °C, substantially smaller than 88.2 Ω cm2 of pristine LSM electrode. The core–shell structured LSCF–LSM electrodes also show good operating stability at 700 °C and 600 °C over 24–40 h.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call