Abstract
SummaryHybrid amplifiers combine discrete transistors with operational amplifiers (OAs) achieving superior characteristics compared with commercially available OAs, while keeping simple structures and a reduced number of parts. A single‐ended amplifier topology based on a junction field‐effect transistor (JFET) is proposed as a means of achieving very low input noise levels, both in current and voltage. It is direct‐coupled and allows to place a high‐pass filter at its input to preserve input range, or at its output to optimize noise. The proposed topology results in a low input capacitance and low input‐current noise, making it suitable for applications where multiple amplifiers are connected in parallel to achieve ultra‐low noise levels. The amplifier's gain is set by a resistor ratio, being suitable for instrumentation front ends. The circuit analysis and design equations are provided to adapt it for different applications and, as an example, an amplifier with a gain of 40 dB and a bandwidth from DC to 1 MHz was designed, built, and tested. The dominant noise contribution of the amplifier was the JFET (a JFE2140 device), featuring an input noise voltage of , that is reduced to when two amplifiers are connected in parallel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Circuit Theory and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.