Abstract
For the corpuscular plasma heating in the MST plasma device (Madison, United States), an injector of hydrogen atoms with 25-keV energy, equivalent at omic current of >45 A, and 20-ms pulse duration was designed and put into operation at the Budker Institute of Nuclear Physics (Novosibirsk, Russia) in 2009. The pulse repetition rate is 5 min. The output current of the ion source in the atomic injector exceeds 50 A. A high-voltage source with a 1.5-MW power was design ed for the high-voltage powering of the atomic injector. The run duration of the power supply with rated characteristics is >20 ms. The power supply is based on a distributed capacitive energy storage, which allows the power consumption from the industrial network to be reduced down to 10 kW at a pulsed load power of 1.5 MW. The high-voltage power supply smoothly regulates the output voltage from 0 to 30 kV and is capable of being quickly deenergized if high-voltage breakdown of the load takes place. The diagram and structural components of the high-voltage power system of the atomic injector are described, and its test results are given.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call