Abstract
Silicon-based millimeter-wave (mm-Wave) power amplifiers (PAs) with high power and high peak/back-off efficiency are highly desired to efficiently amplify multi-Gb/s 5G NR signals. This article presents a fully integrated high-power broadband linear Doherty PA with multi-primary distributed-active-transformer (DAT) power combining. We introduce a transformer-based impedance inverter for active load modulation and a multi-primary DAT structure for hybrid series and parallel power combining. Based on this, we propose a transformer-based Doherty combiner with more design freedom and a multi-primary DAT-based Doherty PA for simultaneous active load modulation and low-loss power combining. The EM simulation results demonstrate that the proposed DAT-based Doherty output network achieves very symmetric and balanced load impedances among all the main and auxiliary PA ports. As a proof of concept, a 24-30-GHz prototype PA is implemented in a 0.13- μm SiGe BiCMOS process. The PA achieves 30.4% PAE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">max</sub> , 28.3-dBm P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sat</sub> , 30.2% PAE at 26.8-dBm P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1 dB</sub> , and 21.2% PAE at 6-dB back-off from P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sat</sub> at 28 GHz. Modulation measurement with single-carrier 64-QAM signals and 5G NR FR2 orthogonal frequency-division multiplexing (OFDM) signals has been demonstrated. For a 200-MHz 1-CC 5G NR FR2 64-QAM signal, the PA achieves 18.1-dBm P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">avg</sub> and 13.8% PAE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">avg</sub> with -25.1-dB rms EVM at 28 GHz.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.