Abstract

A highly linear LNA is implemented in a 0.18 µm SOI CMOS process for 1 GHz SAW-less receiver applications. To achieve lower noise figure (NF) than conventional simultaneous noise and input matching methods, a capacitive loading based simultaneous noise and input matching technique reducing the NF degradation coming from a lossy gate inductor has been devised. In addition, in order to improve both the 1 dB gain compression point (CP1dB) and the third-order intercept point (IP3) without sacrificing NF, a large-signal transconductance linearization method adopting body-bias control and complementary-superposition is proposed. The proposed LNA shows a measured input-referred CP1dB of 3 dBm, 1 dB desensitization point (B1dB) of 0 dBm and IB (in-band)-IIP3 of 22 dBm with gain of 10.7 dB and NF of 1.3 dB at 1 GHz while driving a 50 Ω load impedance. It draws 20 mA with a buffer stage from a 2.5 V supply voltage.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.