A high‐power, high‐isolation, dual‐polarised planar phased array antenna

Abstract

AbstractA high‐power, high‐isolation, dual‐polarised planar phased array antenna is presented. Based on a multi‐layer microstrip structure, two sets of polarisation ports are fed through orthogonal slot coupling, achieving high isolation and low cross‐polarisation. Double‐layer radiation patches and cavity interlayers are used to expand the bandwidth and increase the gain. Metal vias are added around microstrip feeders and between array units to suppress surface waves, thereby improving the scanning performance of the phased array. A smooth gradient microstrip structure is designed to improve the power capacity while realising broadband impedance matching. The measured results show that in the 8–10 GHz frequency band, the isolation of the dual polarisation ports is greater than 50 dB, and the impedance bandwidth reaches 22.2%, with active VSWR <1.5 when not scanning. Both sets of polarisation can achieve 2‐D beam scanning in the range of E‐plane ±20° and H‐plane ±40° without grating lobes, maintaining the scan loss below 2.4 dB, cross‐polarisation below −20 dB and active VSWR <2. Each unit achieves a high gain of 7.4 dB and large power capacity of 5 kW; so the entire 8 × 8 phased array can achieve a main lobe gain of 25.5 dB and realise high‐power directional radiation with the effective isotropic radiated power of 92.5 dBm. The proposed planar antenna has a low profile of 5.5 mm (0.17λ0).