Abstract
This study presents a systematic and practical approach for dimensional and surface quality assessment of precast concrete elements using building information modeling (BIM) and 3D laser scanning technology. As precast concrete based rapid construction is becoming commonplace and standardized in the construction industry, checking the conformity of dimensional and surface qualities of precast concrete elements to the specified tolerances has become ever more important in order to prevent failure during construction. Moreover, as BIM gains popularity due to significant developments in information technology, an autonomous and intelligent quality assessment system that is interoperable with BIM is needed. The current methods for dimensional and surface quality assessment of precast concrete elements, however, rely largely on manual inspection and contact-type measurement devices, which are time demanding and costly. In addition, systematic data storage and delivery systems for dimensional and surface quality assessment are currently lacking. To overcome the limitations of the current methods for dimensional and surface quality assessment of precast concrete elements, this study aims to establish an end-to-end framework for dimensional and surface quality assessment of precast concrete elements based on BIM and 3D laser scanning. The proposed framework is composed of four parts: (1) the inspection checklists; (2) the inspection procedure; (3) the selection of an optimal scanner and scan parameters; and (4) the inspection data storage and delivery method. In order to investigate the feasibility of the proposed framework, case studies assessing the dimensional and surface qualities of actual precast concretes are conducted. The results of the case studies demonstrate that the proposed approach using BIM and 3D laser scanning has the potential to produce an automated and reliable dimensional and surface quality assessment for precast concrete elements. • A framework for quality assessment of precast concrete elements is developed. • The framework combines 3D laser scanning with building information modeling. • Feasibility of the proposed system is validated through actual precast panel tests. • The proposed system produces an accurate and efficient quality assessment result.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.