Abstract
In Part I [1] of this paper, Gurson’s mixed hardening plasticity model with strain and stress-controlled nucleations, was used in a large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Due to low stress triaxiality at the bulge of the cylinders, it was found that localization may occur before void coalescence. In this paper, necessary conditions of localizations are analyzed for the axial compression of porous cylinders under sticking friction. Shear band type of localization with a normal mode of fracture has been predicted for the majority of the cases studied. Various existing localization conditions and fracture criteria are assessed using the results from the simulation. The maximum shear stress at failure is approximately constant and a constant critical damage can not be found.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
