Abstract
Beamline 1-BM at the Advanced Photon Source (APS) delivers a white beam from a bending magnet with very intense x-ray photon flux. One important application of this beamline is white-beam x-ray topography imaging for crystal-based x-ray optics development and for industrial characterization of single crystals and epitaxial materials. Due to the intense photon flux from the third-generation synchrotron source of the APS, the exposure time of the imaging process should be accurately controlled down to the millisecond level. For this purpose we have designed and implemented a fast shutter that is vacuum compatible to 10−8 torr. The aperture is a copper block with a 70 mm horizontal and 5 mm vertical opening and is water cooled. The aperture is moved vertically up and down by means of a linear voice-coil actuator. The aperture's position is controlled using encoder feedback in a servo loop running on an industrial motion controller. A shutter opening response time of 32 milliseconds was measured. In this paper, we describe the shutter mechanics and its associated electronics installed at the 1-BM, and we report example white-beam topographs of diamond type IIa crystals.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call