A fast, simple and local protection scheme for fault detection and classification during power swings based on differential current component

Abstract

Listen

Translate article

Among the various challenges of transmission line distance protection, it has become increasingly difficult to deal with the symmetrical phenomenon of power swing (PS) and it can lead to maloperation of distance relays and power system blackout. Distance relays have challenges in distinguishing the symmetrical fault during power swing and would send a wrong trip command to the circuit breakers, leading to major blackouts. To solve this issue, the main objective of this study is to provide a fast, simple, and local protection scheme based on differential current component (DCC), which is extracted by the difference in predicted and actual samples of local current component. Autoregression technique is used to predict the future cycle current samples using available samples. Based on the DCC, a novel index named differential current component ratio (DCCR) is introduced to effectively detect the internal symmetrical faults from fast/slow power swing conditions. Several tests are run for different fault types, different power swing frequencies, different fault locations, different fault resistances and different fault inception instants. Finally, the results are compared with the available methods. Results demonstrate the high accuracy of the proposed method in fast and accurate detection of internal symmetrical faults during power swing in different frequency rates in less than one cycle.