A fast, reliable, low‐cost, and efficient xylan extraction for xylooligosaccharides production

Abstract

AbstractA fast, reliable, low‐cost, and efficient method for the recovery of xylan from agro‐residue materials is needed to improve the use of xylan in industrial processes. Xylan was extracted from two agrowastes (corncobs and wheat bran) using a cost‐effective alkali extraction method. The characteristic band patterns and bending vibrations associated with hemicellulose and beta glycoside linkage could be seen in the corncob‐extracted xylan (CCEx) and wheatbran‐extracted xylan (WBEx). Scanning electron microscopy (SEM) analysis showed that the extracted xylans consisted of aggregated and nonaggregated particles with irregular morphology and rough surfaces. Particle‐size analysis displayed average sizes of 205.6, 210.8, and 794.2 nm for commercial beechwood xylan (Bx), CCEx, and WBEx, respectively. Alkali extraction was performed with different concentrations of NaOH, from 5% to 20%, with a solid–liquid ratio of 1:20. It was found that 82.90 and 76.77% of xylan were extracted from corncob and wheat bran, respectively, which represents a higher yield obtained in a shorter duration in comparison with studies in the literature. The enzymatic hydrolysis of wheat bran and corncob that used 250 IU/mL of Enterobacter hormaechie KS1 xylanase yielded 334.38 and 162.35 mg/g of xylooligosaccharides. Their properties were studied and were found to be very similar to those of commercial xylan. They could reduce costs if applied in industry.