Abstract

In the present research, the synthesis of highly stable multiwalled carbon nanotubes in aqueous media is developed using a one-pot, covalent and green functionalization technique to improve the heat transfer and hydrodynamic behavior of a horizontal stainless-steel tube subjected to a uniform heat flow at its outer surface. Instead of using corrosive inorganic acids, the free radical grafting of gallic acids is used in this procedure. In this work, GA-functionalized multiwalled carbon nanotubes water-based colloidal suspensions (nanofluids) were prepared at three different weight concentrations. Various characterization techniques comprising Fourier transform infrared spectroscopy, Raman spectroscopy, High resolution transmission Electron Microscopy, and zeta-potential measurements were performed and confirmed the success of MWCNT functionalization. The thermophysical properties were evaluated experimentally and validated using empirical correlations available in the literature. To prove the colloidal suspension stability, ultraviolet-visible spectroscopy was used, and the results showed that nanofluid was stable for almost 60 days. When the GAMWCNT concentration was increased, there was a significant improvement in the thermal conductivity. Moreover, the nanofluids' dynamic viscosity experienced a slight increment up to 7.30% when the GAMWCNTs were loaded relative to distilled water. Following the confirmation of the experimental setup's analytical correlations, tests for the colloidal GAMWCNT suspension flowing through a heated horizontal tube were carried out in a fully developed turbulent state. A significant enhancement in the convective heat transfer coefficient was obtained, with only minor growth in the relative pumping power by 33.05 and 1.19%, respectively. More importantly, the reported positive performance index indicator for all the Reynolds numbers of ranges shows the possibility of using the synthesized GAMWCNT aqueous suspensions as an alternative working fluid in heat transfer systems.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call