A discussion on the various aspects of the minimum pressing time for polyurethane adhesives

Abstract

ABSTRACT For many purposes related to the bonding of wood substrates, one-component polyurethane adhesives (1C-PUR) are of great significance. 1C-PUR adhesives are widely used, especially in the cross laminated timber (CLT) production. One major benefit is their ability to be pressed at room temperature. However, not only pressing temperature but also the pressing time is an important economic aspect for manufacturers. Knowing the minimum possible press time offers an economic advantage, however, there have been only few publications on this topic so far. The aim of this work was to investigate and evaluate various aspects of a 1C-PUR adhesive with regard to the minimum pressing time comparing newly developed knowledge-based approaches. The analysis included the strength development of the advanced curing of the adhesive, the development of the final internal bond strength and the minimum required press time for bonded joints to withstand imposed stress. The influence of the wood moisture content and closed assembly time were also investigated. The present study found that closed assembly time had a favourable influence on the required press time period. With immediate testing of the glued joint it also revealed a quicker strength development with lower strength values at a higher wood moisture content.