Abstract

Increased operations of aircraft, both commercial and military in hostile desert environments have increased the risk of micro-sized particle ingestion into engines. The probability of increased sand and dust ingestion results in increased life cycle costs in addition to increased potential for performance loss. Thus, the ability to accurately assess the amount of inlet debris would be useful for engine diagnostics and prognostic evaluation. Previous engine monitoring studies were based on the particle measurements performed a posteriori. Thus, there exists a need for in situ quantification of ingested particles. This paper describes the initial development of a line-of-sight optical technique to characterize the ingested particles at concentrations similar to those experienced by aircraft in brownout conditions using laser extinction with the end goal of producing an onboard aircraft diagnostic sensor. By measuring the amount of light that is transmitted due to the effects of scattering and absorption in the presence of particles over a range of concentrations, a relationship between particle diameters and the laser light extinction was obtained. This relationship was then used to obtain information on diameters and number densities of ingested particles. The particle size range of interest was chosen to be between 1 and 10 μm and the size distribution function was assumed to be lognormal. Tests were performed on polystyrene latex spheres of sizes 1.32 μm, 3.9 μm, and 5.1 μm in water dispersions to measure diameters and concentrations. Measurements were performed over multiple wavelengths to obtain information on the size distribution and number density of particles. Results of tests presented in this paper establish the validity of the laser extinction technique to provide real time information of ingested particles and will serve as an impetus to carry out further research using this technique to characterize particles.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call