Abstract
This paper presents a design strategy to enhance the bandwidth of three-stage Doherty power amplifier (DPA) with operation upto 12-dB back-off. Based on the proposed strategy, a broadband 48-W DPA is designed and implemented using packaged CREE GaN transistors. The measured drain efficiency of 50%–61.8% at 12-dB back-off and 51.9%–66.2% at 6-dB back-off is obtained over the frequency range of 600–900 MHz. Over this 300-MHz band, the drain efficiency is between 51.1% and 78% at saturation. This corresponds to 40% fractional bandwidth. The three-stage DPA is also linearized with a three carrier 15-MHz WCDMA signal with a PAPR of 10.6 dB at various frequencies within operating band and shows the output signal qualifies spectral mask specifications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.