Abstract
A cylindrical traveling wave ultrasonic motor using bonded-type composite beam is proposed in this work. In this new design, a new exciting mode for L-B (longitudinal-bending) hybrid vibrations using bonded-type is adopted, which requires only two pieces of PZT ceramic plates and a single metal beam. In the new motor, the traveling wave of a cylinder can be excited by the L-B vibrations of a bonded-type beam. When two alternating voltages with phase difference are applied, the longitudinal and bending vibrations of the beam can be generated synchronously based on the new exciting mode for L-B hybrid vibrations, and the temporal phase difference of the two vibrations is always 90°. Finite element method is adopted to realize the modal degeneration in order to confirm the final structural parameters of the motor, and analyze the motion trajectory of the driving tip. After the fabrication of a prototype, the vibration characteristics and mechanical output ability are measured. The maximum no-load speed and maximum output torque of the prototype are 342rpm and 6.26mNm at a voltage of 100Vrms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
