Abstract

The cycle slip detection (CSD) and cycle slip repair (CSR) are easily affected by ionospheric delay and observational noise. Aiming at mitigating the above disadvantage, a new BeiDou navigation satellite system (BDS) triple-frequency CSR method (BTCSR) is proposed for the undifferenced phase. BTCSR learns from the classic triple-frequency CSR (CTCSR), with combinations of phases and pseudoranges in correcting ionospheric delay and optimizing observational noise. Different from CTCSR, though, BTCSR has made the following improvements: (1) An optimal model of calculating cycle slip combination is established, which further takes into account the minimization of the effect of residual ionospheric error after the correction. The calculation of cycle slip combination is obtained with the root mean squared errors (0.0646, 0.1261, 0.1069) of cycles, resulting in CSR success rate of 99.9927%, and the wavelengths (4.8842,3.5738,8.1403) of m. (2) A discriminant function is added to guarantee the CSR correctness. This function utilizes epoch-difference value of the ionosphere-free and geometry-free phase to select the correct cycle slip value, which eliminates the interference of large pseudorange errors in determining the final cycle slip. Consequently, the performances of BTCSR and CTCSR have been compared. For the real BDS pseudorange observation with additional 1.5 m errors, which can cover situations of 99.96% pseudorange noise, results of CTCSR show failure, but results of BTCSR keep correct. Moreover, BTCSR has made the following improvements relative to the geometry-free cycle slip detection method (GFCSD) and Melboune–Wubbena cycle slip combination detection method (MWCSD): (1) During a moderate magnetic storm of level 6, CSR testing, with the BDS monitoring station in a low latitude region, showed that some failures occur in GFCSD because of severe ionospheric variation, but BTCSR could correctly identify and fix cycle slips. (2) For the BDS observation data with an additional 1.5 m error on the actual pseudoranges, MWCSD exhibited failures, but the repair results of BTCSR were correct and reliable. (3) For the special slips of (0,59,62) cycles, and equal slips of (1,1,1) cycles on (B1,B2,B3), that are hard to detect by GFCSD and MWCSD, respectively, BTCSR could repair these correctly. Finally, BTCSR obtains reliable repair results under large pseudorange errors and severe ionospheric variations, and the cut-off elevation larger than 10 degrees is the suggested background.

Highlights

  • Since BeiDou navigation satellite system (BDS) constellations have completed global coverage, BDS are providing global services

  • By learning from the classic triple-frequency cycle slip repair (CSR) with the combinations of phases and pseudoranges (CTCSR), this study develops a BDS triple-frequency CSR method (BTCSR)

  • With observation data from the BDS tracking station, BTCSR is tested against the ionospheric disturbance during the time of high ionospheric activity, where a moderate magnetic storm of level 6 or more occurred

Read more

Summary

Introduction

Since BeiDou navigation satellite system (BDS) constellations have completed global coverage, BDS are providing global services. In order to fulfill real-time CSR of single satellite data, researchers have turned their ideas to the combinations of triple-frequency phases and pseudoranges, and their epoch-difference application in CSR [1,24,25,26]. The BTCSR references the conventional idea from CTCSR, and the similarities between BTCSR and CTCSR are the following: (1) the variation of ionospheric delay is corrected in the combination of phases and pseudoranges; and (2) the optimization of observational noises is conducted to calculate the combined cycle slip. The differences between BTCSR and CTCSR are the following: (1) the optimization of calculating cycle slip combination further takes into account the influence of residual ionospheric error after the correction, and the effect of residual ionospheric error on the combined cycle slip calculation is minimized too; and (2) a discriminant function is formed to select the correct cycle slip This function sorts the absolute epoch-difference value of the ionosphere-free and geometry-free phase to determine the final cycle slip. For the other GNSS, the frequencies, signal and measurement quality, precise orbit and clock, and precise positioning performance, have been comprehensively compared and concisely illustrated among the BDS, quasi-zenith satellite system and GPS [35]

Cycle Slip Presentation and Analyzation
Ionospheric Correction and Its Precision
Optimization of Cycle
Cycle Slip Solution
Cycle Slip Repair Against Pseudorange Error
Repair Result Checking
Test Description
Experimental Results and Analysis
Results of BTCSR Against the Small and Special Cycle Slip
Values of cycle slipby combinations and cycle slips onof degrees started
Results of BTCSR
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call