A comprehensive performance analysis of advanced hybrid MPPT controllers for fuel cell systems

Abstract

The present power generation corporations are working on Renewable Power Systems (RPS) for supplying electrical power to the automotive power industries. There are several categories of RPSs available in the atmosphere. Among all of the RPSs, the most general power network used for Electric Vehicles (EVs) is hydrogen fuel which is available in nature. The H2 fuel is fed to the Proton Exchange Membrane Fuel Stack (PEMFS) for producing electricity for the EV stations. The advantages of this selected fuel system are more power conversion efficiency, environmentally friendly, low carbon emissions, more power density, less starting time, plus able to work at very low-temperature values. However, this fuel stack faces the issue of a nonlinear power density curve. Due to this nonlinear power supply from the fuel stack, the functioning point of the overall network changes from one position of the I–V curve to another position. So, the peak voltage extraction from the fuel stack is not possible. In this article, there are various metaheuristic optimization-based Maximum Power Point Tracking (MPPT) methodologies are studied along with the conventional methods for obtaining the Maximum Power Point (MPP) position of the PEMFS. From the simulative investigation, the Continuous Different Slope Value-based Cuckoo Search Method (CDSV with CSM) provides better efficiency with more output power. Also, for all the MPPT methods comprehensive analysis has been made by utilizing the simulation results.