Abstract

The wettability of electrodes increases the power and energy densities of the cells of lithium-ion batteries, which is vital to improving their electrochemical performance. Numerous studies in the past have attempted to explain the effect of electrolyte and calendering on wettability. In this work, the wettability behavior of structured and unstructured LiFePO4 electrodes was studied. Firstly, the wettability morphology of the structured electrode was analyzed, and the electrode geometry was quantified in terms of ablation top and bottom width, ablation depth, and aspect ratio. From the result of the geometry analysis, the minimum measured values of aspect ratio and ablation depth were used as structured electrodes. Laser structuring with pitch distances of 112 μm, 224 μm, and 448 μm was applied. Secondly, the wettability of the electrodes was measured mainly by total wetting time and electrolyte spreading area. This study demonstrates that the laser-based structuring of the electrode increases the electrochemically active surface area of the electrode. The electrode structured with 112 μm pitch distance exhibited the fastest wetting at a time of 13.5 s. However, the unstructured electrode exhibited full wetting at a time of 84 s.

Highlights

  • The energy demand of daily human activities is growing fast, causing climate change as a result of greenhouse gas emissions

  • LiFePO4 is one of the most widely used cathode materials in energy storage. It offers excellent electrochemical performance because of its low cost and thermal stability, as well as the fact that it is environmentally safe compared to other cathode materials [10]

  • The unstructured electrode took a long time compared to the structured electrodes. These results indicate that the wetting time of structured electrodes increases when the pitch distance between grooves increases

Read more

Summary

Introduction

The energy demand of daily human activities is growing fast, causing climate change as a result of greenhouse gas emissions. The main components of a lithium-ion battery are the anode, cathode, separator, and electrolyte. The active electrode material is coated on a copper current collector foil. During the battery charging process, lithium ions and electrons flow from the cathode to the anode through an external circuit and separator, and vice-versa during discharging [7,8,9]. LiFePO4 (lithium iron phosphate) is one of the most widely used cathode materials in energy storage. It offers excellent electrochemical performance because of its low cost and thermal stability, as well as the fact that it is environmentally safe compared to other cathode materials [10]

Objectives
Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call