Abstract
ABSTRACT Towards ensuring the structural integrity of the high-temperature components, it is essential to evaluate the creep crack growth (CCG) behaviour, especially for the weaker creep regions of the components. In this study, the CCG behaviour was investigated in the modified 9Cr-1Mo (P91) and Inconel (IN182) buttered layer interface regions of dissimilar metal weld (DMW) joints of P91 and type 316LN SS at 798 K and 898 K. For a quantitative assessment, the CCG rates were compared with the heat-affected zone (HAZ) of similar metal P91 welds (P91HAZ). The CCG rate was characterised using the creep fracture C* parameter as per ASTM E1457–17. The CCG rate in the P91/IN182 interface region was found to be higher than the P91HAZ, viz. 3.5 times and 4 times at 798 K and 898 K, respectively. This could be attributed to the propensity for creep cavitation in the interface region of the DMW joint.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
